Maintenance of hardware
components
Cleaning
1 Unplug the components from AC before attempting to clean.
2 Clean the components with a damp cloth moistened with a
mixture of mild soap and water. The cloth should not have any
excess water in it that could run off onto the components during
cleaning.
3 Wipe with a clean, dry cloth and allow all components to air-dry
completely before next use.
Storing
1 Store the components in their designated air conditioned
examination room or equipment room environments.
2 If not in use, place the plastic tubing in the examination room in
such a way that nobody can stumble over it.
Disposal
◆ Please contact Resoundant for the disposal or dispose of in
accordance with local regulation.
7
7.1
7.2
7.3
Maintenance of hardware components 7
MAGNETOM Family, Biograph mMR | syngo MR D11, syngo MR D13, syngo MR B19, syngo MR B20P,
syngo MR E11
31
Print No. MR-06020G.640.08.04.02
To Next Page
Loading...
