Maintenance
Cleaning
All instructions in the operator manual regarding cleaning and, when
applicable, regarding disinfecting and sterilization must be always
observed.
WARNING
Improper cleaning of the MR system (including coils and
accessories)!
Risk of electric shock
Damage to the equipment
◆ Only clean the system and the components with a damp cloth
(moist wipe, not too wet).
◆ Follow the cleaning instructions provided in all relevant
manuals, which explicitly explain how the various
components should be cleaned and disinfected.
1 Use commercially available cleaning and disinfectant solutions.
Follow the manufacturer's instructions. Refer to the lists of
approved detergents provided in the individual subchapters.
2 Do not use hard or sharp objects (e.g. knives or tweezers) to
remove residue.
3 Do not pour cleaning fluid onto surfaces and do not spray fluids -
always use a damp cloth for cleaning.
4 Do not immerse in cleaning or disinfectant liquid. Do not rinse with
water.
For information regarding cleaning of RF coils, see: Operator Manual
Coils
6
6.1
Maintenance 6
MAGNETOM Avanto, MAGNETOM Verio | syngo MR E11
125
Print No. MR-01501G.621.02.02.02