Control units
The control units are located at the right and the left side of the
patient table at the front of the magnet cover. Optionally, additional
control units are located at the rear side of the magnet.
Control unit on the MAGNETOM Avanto (A) and on the MAGNETOM Verio (B)
(1) Table Stop button
(2) Laser-Light Localizer button
(3) Buttons for moving the table
(4) Buttons for setting the tunnel light, volume of music and
headphones and tunnel ventilation
(5) Start/Stop button
All buttons have a luminous ring.
Table display
The table display shows the status of the functions executed via the
control units.
The table display is located above the magnet bore opening at the
front of the magnet cover. Optionally in back of the magnet, a second
display can be installed for the third control unit.
3.3.1
3.3.2
3 MR system components
56
MR System | Operator Manual
Print No. MR-01501G.621.02.02.02
To Next Page
Loading...
