Siemens MAGNETOM Verio - Operating the In-Room Syngo Acquisition Workplace

Operating the In-Room syngo Acquisition Workplace
The In-Room syngo Acquisition Workplace (In-Room syngo Acq WP) is
operated via the trackball and three keys. The same software
functions are available as with the syngo Acquisition Workplace.

CAUTION
Diagnosis at the In-Room syngo Acquisition Workplace or use for
interventional procedures!
Risk of patient injury; incorrect diagnosis
◆ Always plan appropriate emergency measures prior to
starting an MR-guided or MR-monitored interventional
procedure.
◆ Do not use the In-Room syngo Acquisition Workplace for
diagnostic purposes.
(1) Keys
(2) Trackball
(3) Handle
The keys have the same functions as those of the mouse.
1 Roll the trackball to move the pointer on the program interface.
2 Press the keys to execute a specific application.
3.8.2
Operating the trackball and the
keys
MR system components 3
MAGNETOM Avanto, MAGNETOM Verio | syngo MR E11
77
Print No. MR-01501G.621.02.02.02