2 - 1
Siemens AG SPB7-230.841.03 Page 1 of 6 M300/1000/3000/3000 Nova
Medical Solutions Rev. 02 04.04 CS PS 24 Service
Procedure - Compression mechanism 2
Remove the covers from compression unit 2
• System OFF.
• Pry open the lid on the maximum compression force presetting knob. Loosen the screw
underneath the lid and remove the knob (1/Fig. 1).
• Remove the cover from the manual compression/decompression knobs (2/Fig. 1).
• Release the locking pin on the upper and lower cover and remove the covers.
• Loosen the Allen screws on top and at the bottom of the compression unit holding the left
side cover (3/Fig. 1). Remove the side cover.
Fig. 1
3
3
Locking pin
1
2
To Next Page
Loading...
