Siemens AG SPB7-250.841.01.04.02 MAMMOMAT Novation DR
05.05 CS SD 24
Collimator and D814 47
Page 47 of 64
Medical Solutions
Replacing the light localizer lamp 0
If only the light localizer lamp is defective, the lamp can be replaced as follows:
• Switch the system OFF.
Fig. 24: Collimator
• Remove the two screws (1/Fig. 24 / p. 47)
• Remove the plate
• Remove the two screws (1/Fig. 25 / p. 47)
NOTE
Be careful not to damage the filter disk.
Fig. 25:
To Next Page
Loading...
