Opdima SPB7-230.814.01 Page 2 of 2 Siemens AG
Installation Rev. 01 10.04 CS PS 24 Medical Solutions
4 - 2 Preparatory work
Unpacking 4
General 4
Workstation 4
The workstation is packed in a card board box which also contains technical
documentation and CDs for application software and operating system
1
.
Biopsy controller, miscellaneous 4
The biopsy controller is packed in a card board box together with cables, miscellaneous
installation material.
CCD camera
The CCD camera is packed in an attaché case. Keep the case for future use.
Optional equipment and update kits 4
If optional equipment and/or update kits are ordered, these are packed in separate boxes.
Follow the directional marks on the box during transport, storage
and unpacking.
1. Only needed if a software reinstallation is necessary (see MAMMOMAT 1000/3000 Nova - Opdimar Service
Instructions). Store the documentation and software CDs in a proper place for future service use.
The CCD camera is very sensitive to mechanical shocks and tem-
perature changes. In the camera shock and temperature sensors
are integrated.
Risk of damaging the equipment.
The camera has to be handled with extreme care.
When disconnected from the biopsy controller, the camera shall
always be stored in the attaché case delivered with the system.
Do not touch the pins in the contacts of the camera.
NOTE
CAUTION
To Next Page
Loading...
