Siemens MAMMOMAT Novation DR - Page 34

Opdima SPB7-230.814.01 Page 20 of 24 Siemens AG
Installation Rev. 01 10.04 CS PS 24 Medical Solutions
5 - 20 Installation
If the monitor is wrongly adjusted:
Make an autoadjust under the heading Auto.
Control that the monitor has the correct settings for vertical sync under the Others set-
tings, see Fig. 21.
Fig. 21 Monitor settings
The settings shall be:
Brightness Contrast:
Brightness 50
Contrast 50
Backlight 70
Color 2
Position Zoom:
Fill all
Source:
Analog RGB
Auto:
Auto brightness: off
Auto position zoom: on
Auto frequency phase: on
Auto all off
Language:
English
OPD00632