Siemens MAMMOMAT Novation DR - Disabling the Film Exposure

Siemens AG SPB7-250.815.06.02.02 MAMMOMAT Novation DR
12.05 CS SD 24
Final procedures 89
Page 89 of 116
Medical Solutions
11-
10Final procedures
Disabling the film exposure 0
The film exposure switch has to be disabled.
1. Connect the service PC to the MAMMOMAT stand and start the service software.
2. Go to:
Configuration -> Miscellaneous -> Allow film exposure
and make sure that the Switch is set to OFF.
Fig. 60: Set Allow film exposure to OFF