3-2 February 5, 2004 FFDM-S Service Manual
Unpacking the DirectRay Hardware Components
Unpacking the DirectRay Detector
NOTE: Save all packing materials, in case you need to return the DirectRay Detector to Direct
Radiography Corp.
To unpack the DirectRay Detector:
1. Open the box and remove the packing insert.
2. Remove all of the other packing material covering the inner box in which the
Detector is packaged.
GS20_414.cdr
Open box and remove
top packing insert
Remove packing inserts
and phase change material
(shown here in gray)
GS20_415.cdr
To Next Page
Loading...
