5-18 February 5, 2004 FFDM-S Service Manual
Viewing Media Converter Board (MCB) Information and Upgrading Its
Firmware
NOTE: Viewing MCB information, or upgrading its firmware, is intended as an aid to Direct
Radiography Corp. Support staff in troubleshooting PXCM problems. For this reason, you will typically
be using these functions only at the direction of Direct Radiography Corp. Support.
To view MCB firmware information, click the Brick Firmware link on the Brick
Control Panel page, or the MCB link on any of the other PXCM pages. The MCB
page displays.
NOTE: For security purposes, you may be prompted to enter a login name and password before
executing this function. For more information, refer to “Function Security Levels and Login Prompts”
on page 5-2.
CAUTION
The MCB page includes an Advanced button. This function is intended
only as an aid to Direct Radiography Corp. Support staff in troubleshooting AEC
problems. Use of this function could adversely affect MCB operation.
To Next Page
Loading...
