Siemens MASS 2100 - Technical Reference; Sensor Dimension Dependent Default Settings

Technical reference
A
A.1 Sensor dimension dependent default settings
Mass flow
Sensor type Sensor size Default value Unit: Kg/s
Upper Limit Alarm and Upper Limit Warning
FC400 DN 15 2,209
DN 25 6,136
DN 50 24,54
DN 80 62,83
DN 100 180,56
DN 150 298,61
MASS2100 1 0,010
1.5 0,022
2.1 0,043
3 0,088
FC300 DN4 HP 2 0,039
FC300 DN4 C22 3 0,088
FC300 DN4 316 3.5 0,120
MASS2100 6 0,353
15 2,209
Sensor type Sensor size Default value Unit: Kg/s
Lower Limit Alarm and Lower Limit Warning
FC400 DN 15 -2,209
DN 25 -6,136
DN 50 -24,54
DN 80 -62,83
DN 100 -180,56
DN 150 -298,61
MASS2100 1 -0,010
1.5 -0,022
2.1 -0,043
3 -0,088
FC300 DN4 HP 2 -0,039
FC300 DN4 C22 3 -0,088
FC300 DN4 316 3.5 -0,120
MASS 2100 & FC300 (FCT030)
Operating Instructions, 06/2017, A5E39789040-AA 259