Appendix
A.2 Appendix II
BW500 and BW500/L
Operating Instructions, 12/2016, A5E33482052-AD
203
3.05 November 11, 2002
• SmartLinx memory map
increased
• Improve external totalizer
contact closure duration
3.06 July 23, 2003
• Updated PID control be-
tween remote/ local setpoint
• Improve Dolphin Plus com-
munications
• Batch setpoint now adjusta-
ble in "RUN" mode
• Slowed down the display
when scroll key is held
3.08 March 1, 2006
• Remote zero and span cali-
brations fixed
• Differential speed detection
added
• Moisture meter added
• Inclinometer feature added
3.09 August 8, 2006
• Remote totalizer exceeded
error fixed
• Totalizer dropout (P619)
now limited to 3% or less
when certification switch en-
abled
3.11 March 31, 2009
• Second speed sensor accu-
racy at frequencies below 10
Hz fixed
• Parameter download using
Dolphin Plus fixed (Dolphin
Plus patch required)
• Electronic load cell balanc-
ing of C&D fixed
• Word order format with re-
mote communication fixed
• Integrator serial number
added to printout
• Power failure message add-
ed to printout
3.12 August 2009
• Fixed word order for
SmartLinx
To Next Page
Loading...
