Glossary
BW500 and BW500/L
210 Operating Instructions, 12/2016, A5E33482052-AD
Single Parameter Access, used to view or edit parameters through the available communication
ports.
This is a count value representing the mV signal provided by either the LVDT or Load Cell at
100% design load.
This is the number of span calibrations that have been performed since the last master reset.
A calibrated weight which will represent a certain load on the scale.
An incremental counter that records the total of material that has been monitored.
Shows the number of zero calibrations that have been performed since the last master reset.
To Next Page
Loading...
