Siemens Milltronics BW500/L - System Diagram

Installation
5.4 Interconnection
BW500 and BW500/L
28 Operating Instructions, 12/2016, A5E33482052-AD
5.4.1
System Diagram
①
Belt scale, see Specifications (Page 17)
②
Speed sensor, optional, see Specifications (Page 17)
③
mA output to customer device
④
mA output to customer device (optional I/O board required)
⑤
mA input from customer device (optional I/O board required)
⑥
Relay output, to customer device (2 for BW500/L)
⑦
Auxiliary inputs
⑧
Customer remote totalizer
⑨
Optional fieldbus connection (SmartLinx card required)
⑩
Communication ports can be configured for Siemens Milltronics Dolphin Plus, print data, or
Modbus ASCII or RTU protocol
⑪
Communication ports can be configured for Siemens Milltronics Dolphin Plus, print data, or
Modbus ASCII or RTU protocol
⑫
Communication ports can be configured for Siemens Milltronics Dolphin Plus, print data, or
Modbus ASCII or RTU protocol
⑬
Fieldbus communication