7ML19985CN01 Milltronics SF 500 – INSTRUCTION MANUAL Page 15
mmmmm
Installation
Relay Output
The relays are shown in de-energized state. Contacts are normally open, rated 5 A at
250V non-inductive.
Power Connections
Notes:
1. The equipment must be protected
by a 15 A fuse or a circuit breaker
in the building installation.
2. A circuit breaker or switch in the
building installation, marked as the
disconnect switch, shall be in close
proximity to the equipment and
within easy reach of the operator.
100 / 115 / 200 / 230V
50 / 60 Hz
select voltage via switch
To Next Page
Loading...
