Siemens miniTek Quick Start Guide

miniTek on / off button with Power LED
• Press for 3 seconds to turn
miniTek on / off.
Audio source button
• Press to switch from microphone / telecoil
program to external audio sources.
• Press to change external audio source:
1. FM Transmitter (DAI)
2. Line-in (2.5 mm stereo socket)
3. First Tek Transmitter
4. Second Tek Transmitter
5. Telecoil
Functions
Quick-Start Guide miniTek
miniTek
™
Quick-Start Guide
www.usa.siemens.com/hearing
Mute / Stand-by button
• Press during audio streaming or during a
phone call to turn hearing instrument
microphones on / off (mute).
• Press for 3 seconds to turn hearing
instruments on / off (stand-by).
Telephone button
• Press to answer / end call.
• Press for 3 seconds to reject
incoming call.
• Press for 5 seconds to start pairing
miniTek with phone (PIN Code: 0000).
• Press twice during phone call to transfer
call from miniTek / hearing instruments
back to phone; press button again to
transfer call from phone back to miniTek /
hearing instruments
• Press twice to re-connect miniTek to
phone (phone may automatically
re-connect).
Volume down button
• Press to decrease volume.
Volume up button
• Press to increase volume.
Battery charged Battery not fully charged
• miniTek off / unplugged LED Off LED Off
• miniTek on / unplugged LED flashes green LED flashes red
• miniTek off / plugged in LED constant green LED constant red
• miniTek on / plugged in LED pulses green LED pulses red
LED Status
Program change button
• Press to change current hearing
instrument microphone / telecoil
program.
• Press to switch from external audio source
to hearing instrument microphone /
telecoil program(s).

Siemens miniTek Specifications

General

Brand	Siemens
Model	miniTek
Category	Remote Control
Language	English