Siemens miniTek - Program, Volume, and Audio Source Selection

Basic functions
15
Changing the hearing program of your hearing
instruments
 Press
P
to change the hearing program.
Each time you press the program button, your hearing
instruments switch to the next program.
Each program change is confirmed by an acoustic
signal.
Changing the audio source (if connected)
Each time you press
, your miniTek switches to the
next available audio source according to the following
overview:
FM transmitter (DAI)
Line-in (2.5 mm stereo socket)
First transmitter
Second transmitter (optional)
T-coil
Your Hearing Care Professional has to configure
your miniTek for your audio sources.