Preparation for use and operation The battery
22
A26391-K84-Z100-1-7619
Using AC adapter as external power adapter
1
2
²²
Switch off the notebook.
²²
Swing open the display.
²²
Place the notebook on a level surface.
²²
Press the release button of the AC adapters
(1).
²²
Pull the AC adapter out of the slot (2).
²²
Install the battery in the slide-in module.
3
2
1
²²
Open the flap of the AC adapter (1).
²²
Pull the power adapter cable somewhat out of the AC adapter (2). The power adapter cable is
permanently attached to the AC adapter and cannot be completely removed from the AC adapter.
²²
Close the flap of the AC adapter (3). When doing so, make sure that the power adapter cable is
located in the groove of the AC adapter provided, and is not pinched between the flap and the AC
adapter.
²²
Place the notebook on a level, stable surface.
To Next Page
Loading...
