Siemens AG SPR8-230.831.30.03.02 MOBILETT XP Digital
11.05 CS SD 24
Inspection and maintenance 37
Page 37 of 74
Medical Solutions
3.2 Mechanical inspection
WARNING
There is a danger of life-threatening electrical shock. It is possible
to come into contact with live parts when the covers are removed.
Carelessness can result in death or serious bodily injury.
¹ Follow the general and product-specific protective mea-
sures.
3.2.1 Back wheels and support rollers
NOTE
First perform the following work steps listed in the "Back wheels
and support rollers" section one one side. Then check the other
side in the same manner.
• Elevate one side of the system by placing a piece of wood under the chassis
(Fig.1/p.37).
• Secure the wheel on the other side with 2 blocks. Ensure that the MOBILETT XP Digital
is secure!
• Remove the wheel cap and wheel (Fig.1/p.37).
Fig. 1: Braked wheels
3.2.1.1 Back wheels
SIM Brake pad
• Check the brake pad (Fig.2/p.38). The brake pad must be > 1mm. If worn (pad <
1mm), replace the brake according to the "Replacement of parts" instructions.
SIM Drive belt
To Next Page
Loading...
