Siemens NCU 710.3 PN - Compactflash Card; Properties of the Compactflash Card

Spare Parts/Accessories
10.2 CompactFlash Card
NCU 7x0.3 PN
162 Manual, 09/2011, 6FC5397-1EP40-0BA0
10.2 CompactFlash Card
10.2.1 Properties of the CompactFlash card
Application
The CompactFlash Card is delivered bootable. It is not supplied with the control unit and
must be ordered as a separate component.
The CompactFlash Card is inserted in the CF plug-in slot (X109 interface).
CAUTION
The CompactFlash Card may only be inserted or removed when the control unit is
disconnected from the power supply.
Data
The CompactFlash Card is mandatory for operation of the control unit.
As well as the basic software for SINUMERIK and the firmware for SINAMICS, the
CompactFlash Card also contains:
● User data (programs, configuration data, parameter settings)
● Version info (serial number, version, type designation)
● License key This means that the CompactFlash Card can be inserted into another control
unit without requiring a license change.