Glossary-3
Manual OP5, OP15
( ) J31069-D0840-U001-A2-7618
L
Operating mode of OP15. Includes normal operation and also permits com-
munication between the PU or PC and the PLC through the second interface
of the OP15. This operating mode is possible only when the interface to the
PLC is established by means of the AS511 protocol.
M
OP control level at which initiated messages are displayed.
Configurable printout of alarm and event messages concurrently with output
on display.
N
OP operating mode in which messages are displayed and screens can be ma-
nipulated.
O
Field for displaying an actual value.
P
To use a protected function, it is necessary to enter a Password identifying a
given password level. A password level defines the permissions of an opera-
tor. The requisite password level is preset by means of configuration and can
range from 1 (the lowest level) to 9 (the highest level).
Initiation of a function by the PLC.
Loop-through
mode
Message level
Message logging
Normal mode
Output field
Password
Password level
PLC job
Glossary
To Next Page
Loading...
