Siemens OpenStage 15 Administration Manual

Administration
A31003-S2000-M102-2-76A9, 28/05/2009
3-66 OpenScape Voice - OpenStage Family, Administration Manual
administration.fm
Programmable Keys
3.6.3 Call Forwarding
This key function controls phone based call forwarding. If forwarding is enabled, the phone will
forward incoming calls to the predefined call number, depending on the current situation.
The label displayed to the left of the key is defined in Key label <key number>.
The Forwarding type parameter determines the forwarding behaviour. If "All calls" is selected,
any incoming call will be forwarded. If "On no reply" is set, the call will be forwarded when the
user has not answered within a specified timespan. The timespan is configured in the WBM
user pages under Configuration > Incoming calls > Forwarding > No replay delay (seconds). If
"On busy" is selected, incoming calls will be forwarded when the phone is busy.
Administration via WBM
System > Features > Program keys > Forwarding
3.6.4 Ringer Off
Turns off the ringtone. Incoming calls are indicated via LEDs and display only.
The label displayed to the left of the key is defined in Key label <key number>.
Administration via WBM
System > Features > Program keys > Ringer off
>
To use phone based call forwarding, Server features must be switched off (see Sec-
tion 3.5.7, “Server Based Features”).

Siemens OpenStage 15 Specifications

General

Type	IP Phone
Connectivity	Ethernet
Power over Ethernet (PoE)	Yes
Speakerphone	Yes
Keys	Fixed function keys
Headset Port	Yes
Protocols	SIP
Display	Monochrome display
Audio	G.711, G.729
Power Supply	PoE or external power adapter