Siemens OPENSTAGE 20 - HTTP Proxy

administration.fm
A31003-O1010-M100-3-76A9, 12/09/2007
HiPath 8000 - OpenStage Family, Administrator Manual
3-101
Administration
Applications
3.12.1.2 HTTP Proxy
The HTTP data transfer between the phone and the server on which the remote program is run-
ning can be handled be an HTTP proxy, if desired.
First, the proxy itself must be configured. Enter the IP address of the proxy it in the Network >
IP configuration > HTTP proxy parameter, and the corresponding port in the Network > Port
configuration > HTTP proxy parameter.
Use proxy enables or disables the use of the proxy. If disabled, the phones connects directly
to the server. By default, the use of a proxy is disabled.
Administration via Local Phone
|
--- Administration
|
--- Applications
|
--- XML
|--- Add application
|
|
--- Use proxy
|
--- Add Xpressions
|
--- Use proxy
|
--- Administration
|
--- Network
|
--- IP Configuration
|
--- HTTP proxy
|
--- Administration
|
--- Network
|
--- Port configuration
|
--- HTTP proxy