Basic functions
49
Step by Step
On-hook dialing
j Internal calls: Enter the station number.
External calls: Enter the external code and the station
number.
Pay attention to the notes on voice encryption
Æ page 111.
The other party answers with speaker:
^ Lift the handset.
or On-hook dialing: Speakerphone mode.
The called party does not answer or is busy:
n Press the key shown. The LED goes out.
Dialing with the headset connected
Prerequisite: The headset is connected.
j Internal calls: Enter the station number.
External calls: Enter the external code and the station
number.
o The headset key lights up.
The connection is established as soon as your input is
complete.
Pay attention to the notes on voice encryption
Æ page 111.
Your system may also be programmed so that
you have to press the "internal" key before you
dial an internal number.
To call an external party, you have to enter an ex-
ternal code before dialing the party’s telephone
number (Prime Line is not active; contact your
service personnel).
Make sure your headset port is set up properly
Æ page 168.
To Next Page
Loading...
