Siemens PERFECT HARMONY GENIII/E Series - Page 109

Perfect Harmony GENIII/e User’s Manual The Keypad and Display Interface
A1A19000405A: Version 1.3 3-73
s
s
ss
3
Speed fwd max limit 1 2080 Skip bandwidth 2 2390
Speed fwd min limit 1 2090 Skip bandwidth 3 2400
Speed fwd max limit 2 2100 Freq avoid accel time 2410
Speed fwd min limit 2 2110 Spinning load mode 2430
Speed fwd max limit 3 2120 Scan end threshold 2440
Speed fwd min limit 3 2130 Current Level Setpoint 2450
Speed rev max limit 1 2410 Current ramp 2460
Speed rev min limit 1 2150 Max current 2470
Speed rev max limit 2 2160 Frequency scan rate 2480
Speed rev min limit 2 2170 Cond. stop timer 2500
Speed rev max limit 3 2180 Cond. run timer 2510
Speed rev min limit 3 2190 Min cells/phase count (n/3) 2540
Accel time 1 2270 Fast bypass 2600
Decel time 1 2280 Phase I gain 2710
Accel time 2 2290 Phase P gain 2720
Decel time 2 2300 Phase offset 2730
Accel time 3 2310 Phase error threshold 2740
Decel time 3 2320 Frequency Offset 2750
Jerk rate 2330 Up Transfer Timeout 2760
Skip center freq 1 2350 Down Transfer Timeout 2770
Skip center freq 2 2360 Cable Resistance 2940
Stability Menu
Parameter ID Parameter ID