Siemens RDF870KN - Page 21

A6V11439451_----_c 21
RDF870KN available parameters and their order of appearance:
· Room controller:
APP > DISP > SEN > FAN > OPSL > TC > UNIT > LOCK > BUZZ > CALT > APP
RDF870MB available parameters and their order of appearance:
· Room controller:
MODA > MODB > MODF >APP > DISP > SEN > FAN > OPSL > TC > UNIT
> LOCK > BUZZ > CALT > MODA
· Room unit:
MODA > MODB > MODF > LOCK > BUZZ > CALT > MODA
1)
Room controller: 0…8; Room unit: 0…10
2)
The setpoint cannot be changed in ECO mode.
Restriction for sensor selection:
1. If SEN1 and SEN2 are configured with the same selection type 1…8, they
cannot be the same sensor types:
· For type 1…8, sensor1 cannot be the same as sensor2.
· For sensor types with the same function such as 1&2 or 5&6, if
one sensor type is 1 or 5, the other one cannot be 2 or 6.