[sc_rstleds_bos, 1, en_US]
Figure 2-7
Reset LEDs Outputs, Reydisp Software Input Matrix
Reset using Reydisp Evolution
When the relay is latched, LEDs can be reset by sending an appropriate command over the data communica-
tion channels using Reydisp Evolution software.
In the Reydisp Evolution screen, navigate to Relay > Control and click Reset Flags.
Device Functionality
2.8 Resetting of LEDs, Trip Flag Indication, and Binary Outputs
Reyrolle, 7SR46 Device, Manual 31
C53000-G7040-C103-1, Edition 10.2022
To Next Page
Loading...
