Siemens RVA63.280 - Service; Continuous Display; Software Version

160/184
Siemens Building Technologies Basic Dokumentation RVA63.280, RVA53.280 CE1P2374E
Landis & Staefa Division 19.04.2001
Service
3.30 Continuous display
Choice of continuous displays.
Setting range Unit Factory setting
0/1 - 0
The setting will change the continuous display which appears when no setting line is
selected.
Mit Erzeugerfunktionalität Ohne Erzeugerfunktionalität
0 Weekday / time of day Weekday / time of day
1 Actual value of the boiler
temperature
Actual value of the flow temperature
heating circuit
3.31 Software version
Straightforward display of software version in use, without removing the controller
The software version installed represents the state of the software available at the time
the controller was produced.
Display Unit
00.0 ... 99.9 Digits
The software version will automatically be displayed on this line.
Example: 01.0
The first 2 digits give the software version (01.)
The third digit gives the software revision (.0)
Benefit
Setting
Effect
Benefit
Description
Setting
Effect