Siemens Building Technologies CE1B2540en 74 319 0616 0 b 18.07.2008 15/32
How to query or readjust setting values
• Press or to access the setting level
• The settings are assigned to several lines:
Select next line below
Select next line above
• Readjustment of values:
Decrease
Increase
• The value is adopted by selecting the next line or by
leaving the setting level
• Leaving the setting level: Press button of the required
operating mode, or the info button, or automatically after
30 minutes
For list of lines, refer to the last page of these
instructions.
If you wish to practice, reset the time of day (refer to
page 24).
To Next Page
Loading...
