Siemens RVL482 - Page 18

Siemens Building Technologies CE1B2540en 74 319 0616 0 b 18.07.2008 18/32
Procedure:
1. On line , select the weekday whose times you want
to change:
1 = Monday, 2 = Tuesday, etc.
1-7 = all weekdays
2. On line , set the time for the start of NORMAL heating.
3. On line , set the time for the end of NORMAL heating.
If additional daily heating periods are required:
4. On lines and , set the times required for the start
and the end of the 2nd heating period.
5. On lines and , set the times required for the start
and the end of the 3rd heating period.
To cancel a heating period, change line , or
until --:-- appears.
To leave the setting level: Select the required operating
mode.