Siemens Building Technologies CE1B2540en 74 319 0616 0 b 18.07.2008 32/32
Setpoint of NORMAL heating
Setpoint of REDUCED heating
Setpoint of holiday period / protection mode
Weekday (1 to 7), for entering the heating program
to
Entry of heating phases for the heating program
Number of the holiday period (1 to 8)
First day of the holiday period (day.month)
Last day of the holiday period (day.month)
Heating curve, flow temperature at +15 °C
Heating curve, flow temperature at –5 °C
NORMAL d.h.w. temperature setpoint
Actual value of the d.h.w. temperature
REDUCED d.h.w. temperature setpoint
to
Entries for switching program 2
to
Settings the yearly clock (time, weekday, date and year)
Display of faults (refer to page 27)
Displays depend on controller and plant type.
To Previous Page
Loading...
