Siemens S65 - Display symbols; Display symbols (selection)

SIEMENS PTE LTD
S65 Level 2 Service Manual
Copyright © Siemens Pte Ltd. Siemens Technical Support Centre
All Rights Reserved
ICM MP CCQ SLI RHQ Page 15 of 35 Internal Use Only
Step 5
Remove the rear cover using a case opening tool as
shown.
Step 6
Unscrew the 6 T5 plus screws using a Torque screw driver
Step 7
The Lower case assembly, PCB, and Upper case
assembly can now be separated
Step 8
Remove TFT/TFD display and joystick knob from the PCB
Step 9
Remove the Speaker, Camera shield, and Camera
from the PCB
Step 10
Remove MMI PCB (with Metal Dome Foil) and Keypad
from the Upper case