Siemens S7-1200 - Page 330

Extended instructions
8.3 Distributed I/O (PROFINET, PROFIBUS, or AS-i)
S7-1200 Programmable controller
330 System Manual, 03/2014, A5E02486680-AG
Error code
Description
Restriction
80A4 Communication problem on the communication bus
The error occurs between the
CPU and the external DP
interface module.
80B0
• The instruction is not possible for module type.
• The module does not recognize the data record.
• Data record number 241 is not permitted.
-
80B1 The length specified in the RECORD parameter is incorrect. Specified length > record
length
80B2
The configured slot is not occupied.
-
80B3
Actual module type does not match the required module type.
-
80C0
There is no diagnostic information.
-
80C1 The data of the previous write job for the same data record on the module
have not yet been processed by the module.
-
80C2 The module is currently processing the maximum possible number of jobs
for a CPU.
-
80C3
The required resources (memory, etc.) are currently occupied.
-
80C4 Internal temporary error. The job could not be processed.
Repeat the job. If this error occurs frequently, check your system for
electrical disturbance sources.
-
80C5 Distributed I/Os not available Distributed I/Os
80C6 Data record transfer was stopped due to a priority class abort (restart or
background)
Distributed I/Os
8xyy
1
General error codes
Refer to "Extended instructions, Distributed I/O: Error information for RDREC, WRREC, and
RALRM" (Page 322) for more information on general error codes.