Siemens S7-1200 - Installing the SIM Card

Installation
3.3 Installation and removal procedures
S7-1200 Programmable controller
System Manual, 03/2014, A5E02486680-AG
67
①
TS module
④
Plug connector from the TS module
②
TS Adapter
⑤
Cannot be opened
③
Elements
⑥
Ethernet port
Note
Before connecting a TS module and TS adapter basic unit, ensure that the contact pins ④
are not bent.
When connecting, ensure that the mal
e connector and guide elements are positioned
correctly.
Only connect a TS
module into the TS adapter. Do not force a connection of the TS adapter
to a different device, such as an S7
-1200 CPU. Do not change the mechanical construction
of the connector, an
d do not remove or damage the guide elements.
3.3.8.2
Installing the SIM card
Locate the SIM card slot on the underside of the TS module GSM.
Note
The SIM card may only be removed or inserte
d if the TS module GSM is de-energized.