Siemens S7-1200 - SB 1223 2 X 24 VDC Input; 2 X 24 VDC Output Specifications

Technical specifications
A.11 Digital signal boards (SBs)
S7-1200 Programmable controller
System Manual, 03/2014, A5E02486680-AG
943
Table A- 200 Connector pin locations for SB 1223 DI 2 x 5 VDC / DQ 2 x 5 VDC, 200 kHz (6ES7 223-
3AD30-0XB0)
Pin
X19
1
L+ / 5 VDC
2
M / 5 VDC
3
DI e.0
4
DI e.1
5
DQ e.0
6
DQ e.1
A.11.4
SB 1223 2 X 24 VDC input / 2 X 24 VDC output specifications
Table A- 201 General specifications
Technical Data
SB 1223 DI 2 x 24 VDC, DQ 2 x 24 VDC
Order number
6ES7 223-0BD30-0XB0
Dimensions W x H x D (mm)
38 x 62 x 21
Weight
40 grams
Power dissipation
1.0 W
Current consumption (SM Bus)
50 mA
Current consumption (24 VDC)
4 mA / Input used
Table A- 202 Digital inputs
Technical Data
SB 1223 DI 2 x 24 VDC, DQ 2 x 24 VDC
Number of inputs
2
Type
IEC Type 1 sink
Rated voltage
24 VDC at 4 mA, nominal
Continuous permissible voltage 30 VDC, max.
Surge voltage 35 VDC for 0.5 sec.
Logic 1 signal (min.)
15 VDC at 2.5 mA
Logic 0 signal (max.)
5 VDC at 1 mA
HSC clock input rates (max.) Single phase: 30 kHz (15 to 26 VDC)
Quadrature phase: 20 kHz (15 to 26 VDC)
Isolation (field side to logic)
500 VAC for 1 minute
Isolation groups
1
Filter times
us settings
0.1, 0.2, 0.4, 0.8, 1.6, 3.2, 6.4,10.0, 12.8, 20.0
ms settings
0.05, 0.1, 0.2, 0.4, 0.8, 1.6, 3.2, 6.4, 10.0, 12.8, 20.0
Number of inputs on simultaneously
2
Cable length (meters)
500 shielded, 300 unshielded