Siemens S7-1200 - Installation, connecting up, commissioning; Important notes on using the device

5 Operating
EtherNet/IP Scanner
Entry-ID: 109782314, V1.1.0, 04/2021
33
© Siemens AG
2021 All rights reserved
For the ET200SP MF adapter the MFCT (MultiFieldbus Configuration Tool) is used.
The settings are shown below
Figure 5-2: Network Settings for Adapter[0]/ ET200SP MF
Make sure the IP address settings are compatible to the settings of your scanner
device. In this application example the ET200SP MF has compatible settings with:
• IP: 192.168.74.46
• Mask: 255.255.255.0