Using the Keypad Designer to Create a Custom Faceplate for your Text Display (TD) Device
3.10 Printing the Panel Image on a Faceplate
Text Display (TD) User Manual
System Manual, 08/2008, A5E00765548-03
61
You can order additional blank faceplates in perforated A4-size sheets (10 sheets/package)
for the TD 100C, TD 200C and TD400C. The faceplate material is especially designed for
printing with laser printers.
The blank faceplate material for the TD 100C, TD 200C and TD400C is available in the sizes
below:
● Envelope size for printing a single faceplate (TD100C, TD200C): The Keypad Designer
prints registration lines for trimming the faceplate to the correct dimensions. (Use a metal
straight edge and a knife or razor blade to ensure accurate and straight cuts.) The
TD 100C and TD 200C devices ship with a single blank faceplate. The TD400C does not
include a single faceplate.
● A4 size (210 mm x 297 mm) for printing multiple copies of the faceplate (TD100C,
TD200C, and TD400C): You can use the Microsoft Word template to print the faceplate
onto perforated areas of the material. You do not have to cut the faceplates from the
material. Order these A4 sheets from your Siemens distributor. See Appendix A for order
numbers.
ᅛ
ᅛ
ᅛ
.H\SDG'HVLJQHU
3ULQWDVLQJOHIDFHSODWHIURPWKH
.H\SDG'HVLJQHU
3ULQWPXOWLSOHIDFHSODWHVIURPD
ZRUGSURFHVVRUDSSOLFDWLRQ
Ⴠ ([SRUWWKHSDQHOLPDJH
Ⴠ 3DVWHRULQVHUWWKHSDQHOLPDJHLQWR
\RXUZRUGSURFHVVLQJDSSOLFDWLRQ
:RUG3URFHVVLQJ$SSOLFDWLRQ
2SWLRQDO
3ULQWWKHIDFHSODWHRQWRWKHEODQN
IDFHSODWHPDWHULDO
Ⴠ 8VHWKHWHPSODWHIRU0LFURVRIW
:RUGRSWLRQDO
Ⴠ 6HWXSWKHSULQWHUIRUWKHFRUUHFW
SDSHUVL]H
Ⴠ 3ULQWWKHIDFHSODWH
Figure 3-19 Printing the Faceplate
Tip
Before attempting to print a custom faceplate, ensure that both the printer and the word-
processing application are set to the correct paper size:
● Single-copy sheet: Set both the printer and word-processing application to print on
Envelope.
● Multiple-copy A4 sheet: Set both the printer and the word-processing application to print
on A4-size paper.