Using the Keypad Designer to Create a Custom Faceplate for your Text Display (TD) Device
3.10 Printing the Panel Image on a Faceplate
Text Display (TD) User Manual
System Manual, 08/2008, A5E00765548-03
63
Figure 3-21 Printing Multiple Faceplates
To export the panel image to your word-processing application:
1. Open your word-processing application (Microsoft Word) and open the template file.
2. Open the Keypad Designer
3. In the Keypad Designer, select the File > Export > Panel Image to File menu command to
create a bitmap file that you insert into the word-processing application.
4. Insert the panel image into the document by using the word-processing application to
insert the bitmap file (*.bmp) that you created with the Keypad Designer.
5. Follow the instructions in the template file for positioning and sizing the faceplate.
6. After inserting the panel image into the document, save the document using the File >
Save As menu command of the word-processing application.
With the panel images saved in your document, you can print the document to your laser
printer.
Tip
Before printing the panel image onto the blank faceplate material, first test your design by
printing the faceplate onto regular A4 paper.
To Next Page
Loading...
