Using the Text Display Wizard to Configure the S7-200 CPU for Your Text Display (TD) Device
4.3 Configuring the Text Display Device
Text Display (TD) User Manual
System Manual, 08/2008, A5E00765548-03
71
Starting the Text Display Wizard for the TD Device
You use the Text Display wizard to configure the parameters for the TD device. You can also
use the Text Display wizard to modify an existing TD configuration.
To open the Text Display wizard:
1. Start STEP 7-Micro/WIN.
2. Select the Tools > Text Display Wizard menu command.
The Text Display wizard displays the Introduction dialog, as shown in the figure below.
If the Text Display wizard finds an existing TD configuration, the Introduction dialog provides
a list of existing TD configurations and allows you to select a TD configuration to modify.
Use the Next button to proceed through the dialogs of the wizard.
Figure 4-4 Text Display Wizard
Selecting the Type of Device to Configure
As shown below, the Text Display wizard prompts you to select the type of TD device to be
configured.
The Text Display wizard uses this selection to display the dialogs for configuring the
parameters for your specific TD device.
To Next Page
Loading...
