Using the Text Display Wizard to Configure the S7-200 CPU for Your Text Display (TD) Device
4.4 Configuring the Screens for the Text Display Device
Text Display (TD) User Manual
System Manual, 08/2008, A5E00765548-03
81
● Add icons to the text message (TD 200C and TD400C only)
● Determine the sequence of the screens for each group
Figure 4-15 Selecting the Screen Configuration Tasks
Creating the User Menu
The process for creating the screens and user menu is not sequential: You can choose to
enter the screens for each individual group before creating the next group, or you can enter
all of the groups for the user menu before creating any of the screens.
To configure the user menu, you enter the names for each group of screens. See the figure
below for an example of the TD400C. The Text Display wizard displays a green ENTER icon
(and blue arrow) to show which group is selected.
To create the screens associated with a group on the user menu:
1. Move the cursor to the box that designates the group on the user menu.
2. Click the Add Screen button.
3. Create the text for the screen.
4. Click the Add Screen button to create the other screens in this group.
Use the Move Choice Up and Move Choice Down buttons to change the sequence of the
groups listed on the user menu.
To Next Page
Loading...
