Siemens S7-200 - Page 19

Live Demo
Micro Automation Set 14 Entry ID 21062588
V2.0 05/18/05 19/35
Copyright © Siemens AG 2005 All rights reserved
Set14_DocTech_V2.0_en.doc
5.
Open the included S7-200 project on the
configuration PC using STEP 7
Micro/WIN and make the following
settings in STEP 7 Micro/WIN:
• Set the access point in “Set PG/PC
Interface” to “Micro/WIN Æ PC/PPI
cable(PPI)”
• Select the USB port in the properties
of the selected access point
6.
Load the program to the S7-200 CPU and
restart the S7-200 CPU. Select the
respective relevant program for the
selected configuration of Set 14.
Available as code for the “Basis” station:
• Set14_S7-200-200_V2-0_en.mwp
• Set14_S7-200-300_V2-0_en.mwp
• Set14_S7-200-400_V2-0_en.mwp
• Set14_S7-200-WinAC_V2-0_en.mwp
7.
Set the time of day clock of S7-200
“Basis” via PLC/Time of Day Clock.
8.
Connect S7-200 “Basis” to
SCALANCE X108.
9. The USB/PPI cable can now be removed.
S7-200 “Basis”
IE cable
SCALANCE X108