Siemens S7-300 - FTP Commands on the FTP Client

File management and file access with FTP/FTPS
9.3 Advanced CP as FTP server for the S7 CPU data
Configuring and commissioning S7 CPs for Industrial Ethernet
Configuration Manual, 09/2013, C79000-G8976-C182-13
151
Further information
For more detailed information on the structure of the file DB, refer to the documentation on
the SIMATIC NET program blocks /10/ (Page 230).
9.3.2
FTP commands on the FTP client
Example of access
The following figure shows an example of a typical access sequence in the MS-DOS
window.