Siemens S7-300 - S7 Communication

Web diagnostics
11.3 Diagnostics pages of the CP
Configuring and commissioning S7 CPs for Industrial Ethernet
Configuration Manual, 09/2013, C79000-G8976-C182-13
183
Sending a test e-mail in the "SMTP" tab
The "SMTP" tab has a box at the bottom of the dialog with which you can send a test e-mail
from the CP.
The maximum total length of the message is 260 characters (sum of all characters entered in
the rows "From", "To", "Subject" and "Text").
Line
Entry / function
Testing the e-mail connection (max. 260 characters in total)
From Enter a valid sender address here. As default, the row contains the address of
the CP from the connection configuration.
Maximum of 60 characters
To Enter an address for the e-mail recipient.
Maximum of 60 characters
Subject Enter a subject here (optional).
Maximum of 60 characters
Text Enter the text here (optional).
Maximum of 80 characters
User If you configured your e-mail server with authentication, enter the user name
here.
Password If you configured your e-mail server with authentication, enter the password
here.
To send the e-mail click the "Send E-Mail" button.
Note
Security enabled - required user rights
Sending a test e
-mail requires the following user rights:
•
Web: Send test mail
•
Web: Access Web diagnostics and CP file system
See also
S7 communication (Page 183)
11.3.7
S7 communication
The "S7 communication" entry in the navigation panel shows connection tables with address
and status information in protocol-specific tabs.
From the drop-down list above the connection table, select the types of connection to be
displayed: