Communication via Ethernet CPs in S7 stations
1.5 S7 communication via Industrial Ethernet
Configuring and commissioning S7 CPs for Industrial Ethernet
26 Configuration Manual, 09/2013, C79000-G8976-C182-13
Figure 1-3 PC/PG station communicates via a gateway with S7 station on an underlying PROFIBUS
or Ethernet
Configuring S7 connections
Create S7 connections to use S7 communication for data exchange between two
SIMATIC S7 stations.
You will find more detailed information in the online help in STEP 7.
Note
S7 connections via routers are supported only within a STEP 7 project but not between
partners in different STEP 7 projects of a multiproj
ect!
To Next Page
Loading...
