Siemens S7-300 - D Programming Without SFB 52 and SFB 53; Overview of the Programming Without SFB 52 and SFB 53 Section

FM 352 electronic cam controller
Operating Instructions, 05/2011, A5E01071724-03
199
Programming without SFB 52 and SFB 53
D
D.1 Overview of the Programming without SFB 52 and SFB 53 section
If your CPU does not support the system blocks SFB 52 and SFB 53 with DPV1 functionality
Then use the blocks from the program folder "FM 352,452 CAM V1" to program the FM 352.
You will find a description in this section.