Programming without SFB 52 and SFB 53
D.5 FC CAM_DIAG (FC 2)
FM 352 electronic cam controller
Operating Instructions, 05/2011, A5E01071724-03
207
Return values
The function returns the following return values:
RET_VAL BR Description
1 1 Job active
0 1 No job active, no error
-1 0 Error
Reaction to errors
The cause of a job error can be read in the JOB_ERR parameter of the diagnostic DB (see
chapter "Possibilities for error evaluation (Page 145)").
To Next Page
Loading...
