FM 352 electronic cam controller
Operating Instructions, 05/2011, A5E01071724-03
61
Commissioning the FM 352
8
Important notes
Please observe the points listed in the following warnings.
WARNING
In order to prevent injury and material damage:
Install an EMERGENCY STOP switch in the area of the computer. This is the only way to
ensure that the system can be switched off safely in the event of a computer or software
failure.
Install an EMERGENCY STOP limit switch which directly affects the power units of all
drives.
Always make sure to prevent access to the plant areas containing moving parts.
Concurrent controlling and monitoring of the FM 352 from your user program and on the
Test > Commissioning screen form can lead to conflicts with unforeseeable effects. Hence,
always set the CPU to STOP when working in the Test screen form, or disable the user
program.
To Next Page
Loading...
