Siemens S7-300 - Machine Data of the Axis

Machine and cam data
9.7 Machine data of the axis
FM 352 electronic cam controller
Operating Instructions, 05/2011, A5E01071724-03
75
9.7 Machine data of the axis
Axis type
Address Name Type Start value Comment
12.0 AXIS_TYPE DINT L#0 Axis type
0 = linear axis
1 = rotary axis
A linear axis has a limited physical traversing range.
3K\VLFDOHQGSRVLWLRQ
3K\VLFDOVWDUWSRVLWLRQ
A rotary axis is not restricted in its motion range by mechanical limit stops.
+LJKHVWLQGLFDWHGYDOXH
6WDUWRIURWDU\D[LV HQGRI
URWDU\D[LV