Siemens S7-400 - Technical Specifications

CP 443-1 Advanced
Equipment Manual, 03/2023, C79000-G8976-C256-07
95
Technical specifications
8
Table 8- 1 Technical specifications of the CP 443-1 Advanced
Technical specifications
Article number
6GK7443-1GX30-0XE0
Connection to Industrial Ethernet
Quantity
1 x gigabit interface
1 x PROFINET interface with 4port switch
Design of gigabit interface
Connector
1 x RJ-45 jacks
Transmission speed
10/100/1000 Mbps
Design of PROFINET interface (4port
switch)
Connector
4 x RJ-45 jacks
Transmission speed
10/100 Mbps
When working with PROFINET IO and cyclic
transmission, the transmission speed of
100 Mbps full duplex is mandatory.
Aging time (4port switch)
5 minutes
Special features of the X2P1R and
X2P2R ports
Integration in ring topology / MRP possible
Permitted cable lengths (Ethernet)
(Alternative combinations per length range) *
0 ... 55 m
• Max. 55 m IE TP Torsion Cable with IE FC RJ45 Plug 180
• Max. 45 m IE TP Torsion Cable with IE FC RJ45 + 10 m TP Cord via
IE FC RJ45 Outlet
0 ... 85 m
• Max. 85 m IE FC TP Marine/Trailing/Flexible/FRNC/Festoon/Food Cable with
IE FC RJ45 Plug 180
• Max. 75 m IE FC TP Marine/Trailing/Flexible/FRNC/Festoon/Food Cable + 10 m
TP Cord via IE FC RJ45 Outlet
0 ... 100 m
• Max. 100 m IE FC TP Standard Cable with IE FC RJ45 Plug 180
• Max. 90 m IE FC TP Standard Cable + 10 m TP Cord via IE FC RJ45 Outlet
Electrical data
Power supply
via S7 backplane bus
5 V
Current consumption
From backplane bus
1.8 A
Power dissipation
7.25 W
Permissible ambient conditions
Ambient temperature
During operation
0 °C to +60 °C
During storage
-40 °C to +70 °C
During transportation
-40 °C to +70 °C
Relative humidity
During operation
≤ 95 % at 25 °C, no condensation
Operating altitude
≤ 2,000 m above sea level
Contaminant concentration
Acc. to ISA-S71.04 severity level G1, G2, G3